Hello Again Friends,
Hope all are fine! Friends about 70% of pc users use windows based operating system platform again
in the 70% about 45% users use windows xp.
As the Windows XP is the fastest and Durable and low resource consuming operating system.
But in some system because of poor configuration the systems they fail to boot fastly.
But dont worry Today im going to share a great trick that will help you to increase the booting speed of xp.
Just follow the simple steps to boost booting.
Follow the following steps
1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.
If you have any problem comment below. and dont forget to share this post.
Hope all are fine! Friends about 70% of pc users use windows based operating system platform again
in the 70% about 45% users use windows xp.
As the Windows XP is the fastest and Durable and low resource consuming operating system.
But in some system because of poor configuration the systems they fail to boot fastly.
But dont worry Today im going to share a great trick that will help you to increase the booting speed of xp.
Just follow the simple steps to boost booting.
Follow the following steps
1. Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\
2. From the Start menu, select "Run..." & type "gpedit.msc".
3. Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.
4. In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".
5. Click "OK", "Apply" & "OK" once again to exit.
6. From the Start menu, select "Run..." & type "devmgmt.msc".
7. Double click on "IDE ATA/ATAPI controllers"
8. Right click on "Primary IDE Channel" and select "Properties".
9. Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".
10. Right click on "Secondary IDE channel", select "Properties" and repeat step 9.
11. Reboot your computer.
If you have any problem comment below. and dont forget to share this post.
0 comments:
Post a Comment